Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 300
show dot1x interface, Synopsis, extengigabitethernet, Operands, Defaults, Command, Modes, Description
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
17 show dot1x interface show dot1x interface Synopsis Displays the state of a specified interface. show dot1x interface [extengigabitethernet slot/port] Operands extengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. Defaults There are no defaults for this command. Command EXEC mode Modes Description Use this command to display the state of a specified interface. Usage There are no usage guidelines for this command. Guidelines Examples To display the state of 10 Gbps Ethernet interface 0/16: switch>show dot1x interface extengigabitethernet 0/16 Dot1x Global Status: Enabled 802.1X info for interface te0/16 Port Control: Auto Port Auth Status: Unauthorized Protocol Version: 2 ReAuthentication: Disabled Auth Fail Max Attempts: 0 ReAuth Max: 2 Tx Period: 30 seconds Quiet Period: 60 seconds Supplicant Timeout: 30 seconds Server Timeout: 30 seconds Re-Auth Interval: 3600 seconds PAE State: Connected BE State: Invalid Supplicant Name: -- Supplicant Address: 0000.0000.0000 Current Id: 1 Id From Server: 0 See Also none 284 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01