Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 293

dot1x timeout server-timeout 17 dot1x timeout server-timeout Synopsis Operands Sets the authentication sever response timeout. dot1x timeout server-timeout seconds seconds Specifies the number of seconds that a switch waits for the transmission of packets by the switch to the authentication server. The range of valid values is 1-65535. Defaults The default timeout is 30 seconds. Command Interface configuration mode Modes Description Use this command to set the authentication sever response timeout. Usage There are no usage guidelines for this command. Guidelines Examples To set 40 seconds as the switch-to-authentication server transmission time: switch(config)#interface extengigabitethernet 0/16 switch(conf-if-te-0/16)#dot1x timeout server-timeout 40 See Also none Dell Converged Enhanced Ethernet Command Reference 277 53-1002115-01