Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 48
Use this command to display a summary of the SFP information for the specified interface
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2 show media interface show media interface Synopsis Displays the SFP information for a specific interface. show media interface {{in | ex}tengigabitethernet slot/port} Operands extengigabitethernet Specifies a valid external 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. Defaults There are no default configurations for this command. Command Privileged EXEC mode Modes Description Use this command to display a summary of the SFP information for the specified interface. Usage There are no usage guidelines for this command. Guidelines Examples To display SFP information for 10 Gbps Ethernet interface: switch#show media interface extengigabitethernet 0/1 Interface InTenGigabitEthernet 0/1 Identifier 3 SFP Connector 7 LC Transceiver 0000000000000010 10_GB/s Name id Encoding 6 Baud Rate 103 (units 100 megabaud) Length 9u 0 (units km) Length 9u 0 (units 100 meters) Length 50u 8 (units 10 meters) Length 62.5u 3 (units 10 meters) Length Cu 0 (units 1 meter) Vendor Name BROCADE Vendor OUI 42:52:4f Vendor PN 57-0000075-01 Vendor Rev A Wavelength 850 (units nm) Options 001a Loss_of_Sig,Tx_Fault,Tx_Disable BR Max 0 BR Min 0 Serial No AAA108454100431 Date Code 081108 Temperature 44 Centigrade Voltage 3246.8 (Volts) Current 0.002 (mAmps) TX Power 0.1 (uWatts) RX Power 0.1 (uWatts) See Also show media, show media linecard 32 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01