Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 125

lldp profile 6 lldp profile Synopsis Operands Applies a Link Layer Discovery Protocol (LLDP) profile on an interface. lldp profile name no lldp profile name Specifies the profile name. Defaults If the parameters are not defined in the profile, the default values are used. Command Interface configuration mode Modes Description Use this command to apply a Link Layer Discovery Protocol (LLDP) profile on an interface. Use the no lldp profile command to delete the profile from the interface. Usage Guidelines You must use the profile command to create an LLDP profile before you can apply the profile to the interface. Only one LLDP profile can exist at any time for a particular interface. When this command is not present, the parameters defined in the global LLDP configuration are used. Examples To apply an LLDP profile on an interface: switch(conf-if-te-0/1)#lldp profile test See Also protocol lldp Dell Converged Enhanced Ethernet Command Reference 109 53-1002115-01