Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 98
debug ip, Synopsis, packet, interface, count, group, Operands, Description, Defaults, Command, Modes
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5 debug ip debug ip Synopsis Displays the IGMP and ICMP traffic on the switch. debug ip {[packet {[interface interface-type interface-number] | [count tx | rx]]}] | [icmp {[interface interface-type interface-number] | [count tx | rx]}] | [igmp {[interface interface-type interface-number] | [all] | [group multicast-grp-address]}] Operands packet Enable IP packet debugging. interface Displays the IP traffic for the specified interface only. interface-type Network interface type (external TenGigabitEthernet interface, null, port-channel, or VLAN). interface-number Layer-2 or layer-3 Interface number. count tx rx Stops display after display count packets. Counts only transmitted packets. Counts only received packets. icmp Displays the ICMP packets. igmp all Displays the IGMP packets. Enable all IGMP debugging. group Enable IGMP debugging for multicast group. multicast-grp-address Multicast group address. Description Use this command to display all IGMP or ICMP packets received or transmitted. Can be enabled globally, per interface, or on a multicast group. Defaults There are no default configurations for this command. Command EXEC mode Modes User Guidelines There are no usage guidelines for this command. Example none See Also none 82 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01