Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 144

7 lacp timeout lacp timeout Sets the timeout value used by LACP to exchange packets on an interface. Synopsis lacp timeout [long | short] no lacp timeout Operands timeout long short Specifies the number of seconds before invalidating a received Link Aggregation Control Protocol (LACP) data unit (DU). Specifies a long timeout value. Specifies a short timeout value. Defaults By default, the short timeout value is 3 seconds for Dell trunks. For standard trunks, the long timeout value is 90 seconds. Command Interface configuration mode Modes Description Use this command to set the short timeout value for Dell trunks or to set the long timeout value for standard trunks. Use the no lacp timeout command to return to the default value. Usage If the LACP_timeout bit (encoded in Actor_State and Partner_State fields) is set to 1, the short Guidelines timeout takes effect; if set to 0 (zero), the long timeout takes effect. Examples To set the LACP short timeout value to 5 seconds: switch(conf-if-te-0/1)#lacp timeout short 5 See Also none 128 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01