Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 157

Chapter Layer 2 ACL commands 10 clear counters access-list mac Synopsis Operands. Clears all the Media Access Control (MAC) ACL counters for all interfaces which have ACL applied on them or for a specific interface. clear counters access-list mac name [interface |port-channel number | {in | ex}tengigabitethernet slot/port| vlan vlan_id] name Specifies the name of the MAC ACL. interface Use this keyword to specify any of the following interfaces: tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. port-channel number Specifies the port-channel number. The range of valid values is 1-63. vlan vlan_id Specifies the VLAN number. The range of valid values is 1-3583. Defaults There are no default configurations for this command. Command Privileged EXEC mode Modes Description Use this command to clear counters for all or for a specific interface for MAC access list counters. Usage If the interface keyword is not specified, then ACL counters on all interfaces which have this ACL Guidelines applied are cleared. There are 255 ACL counters supported per port group. Example To clear counters for the configured MAC access list named test on an interface: switch#clear counters access-list mac test interface intengigabitethernet 0/1 To clear counters for the configured MAC access list named test on all interfaces on which this ACL is applied: switch#clear counters access-list mac test See Also show mac access-list, show statistics access-list Dell Converged Enhanced Ethernet Command Reference 141 53-1002115-01