Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 68
Use this command to set the Layer 2 interface as access. In access mode, the interface only allows
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3 switchport access switchport access Synopsis Operands Sets the Layer 2 interface as access. switchport access vlan vlan_id no switchport access vlan vlan vlan_id Sets the port VLAN (PVID) to the specified vlan_id. The range of valid values is 1-3583. Defaults By default, all Layer 2 interfaces are in access mode and belong to the VLAN ID 1. Command Interface configuration mode Modes Description Use this command to set the Layer 2 interface as access. In access mode, the interface only allows untagged and priority tagged packets. Use the no switchport access vlan command to set the PVID to the default VLAN 1. Examples To set the Layer 2 interface PVID to 100: switch(conf-if-te-0/19)#switchport access vlan 100 See Also show vlan brief, show interface switchport, switchport mode, switchport trunk 52 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01