Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 132
Use this command to display LLDP information for all neighboring devices on the specified
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
6 show lldp neighbors show lldp neighbors Synopsis Displays LLDP information for all neighboring devices on the specified interface. show lldp neighbors [interface {in | ex}tengigabitethernet slot/port detail] Operands interface Use this keyword to specify the10 Gbps Ethernet interface using the following operand followed by the slot or port number. extengigabitethernet Specifies a valid external 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. intengigabitethernet Specifies a valid internal 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. detail Displays all the LLDP neighbor information in detail for the specified interface. Defaults There are no default configurations for this command. Command EXEC mode Modes Description Use this command to display LLDP information for all neighboring devices on the specified interface. Usage If you do not use the interface operand, only the mandatory TLVs are displayed. Guidelines Examples To display detailed LLDP neighbor information on a specific interface: switch#show lldp neighbors interface intengigabitethernet 0/8 detail Neighbors for Interface Te 0/8 MANDATORY TLVs Local Interface: Te 0/8 Remote Interface: Te 0/8 (IF Name) Dead Interval: 120 secs Remaining Life : 100 secs Tx: 536 Rx: 535 Chassis ID: 0005.1e76.1020 (MAC) Remote Mac: 0005.1e76.102c OPTIONAL TLVs Port Interface Description: Te 0/8 System Name: sw0 System Description: Fibre Channel Switch. System Capabilities: Switching Routing System Capabilities Enabled: Switching 116 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01