Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 230

12 show ip igmp groups show ip igmp groups Synopsis Displays information related to learned groups in the IGMP protocol module. show ip igmp groups [A.B.C.D | detail [[interface | detail [{in | ex}tengigabitethernet slot/port] interface port-channel number | detail| [interface vlan vlan_id | detail]] Operands A.B.C.D detail interface Specifies the group address, as a subnet number in dotted decimal format (for example, 10.0.0.1), as the allowable range of addresses included in the multicast group. Displays the IGMPv3 source information. Use this keyword to specify any of the following interfaces: detail Displays the IGMPv3 source information. interface vlan vlan_id Use this keyword to specify any of the following interfaces: Specifies which VLAN interface to display the snooping configuration related information. The range of valid values is 1-3583. detail Displays the IGMPv3 source information. interface Use this keyword to specify any of the following interfaces: port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. detail Displays the IGMPv3 source information. Defaults There are no defaults for this command. Command Privileged EXEC mode Modes Description Use this command to display the IGMP database, including configured entries for either all groups on all interfaces, or all groups on specific interfaces, or specific groups on specific interfaces. Usage There are no usage guidelines for this command. Guidelines Examples none See Also none 214 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01