Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 228
A.B.C.D, slot/port, number
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
12 ip igmp static-group ip igmp static-group Synopsis Configures the static group membership entries. ip igmp static-group A.B.C.D {interface [{in | ex}tengigabitethernet slot/port] interface port-channel number} no ip igmp static-group A.B.C.D {interface [{in | ex}tengigabitethernet slot/port] interface port-channel number} Operands A.B.C.D Specifies the group address, as a subnet number in dotted decimal format (for example, 10.0.0.1), as the allowable range of addresses included in the multicast group. interface Use this keyword to specify any of the following interfaces: extengigabitethernet Specifies a valid external 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. intengigabitethernet Specifies a valid internal 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. Description Using ip igmp static-group, packets to the group are fast-switched out of the interface, providing that the packets were received on the correct reverse path forwarding (RPF) interface. Static group membership entries are automatically added to the IGMP cache and mroute table. Defaults There are no defaults for this command. Command Privileged EXEC Mode Modes User Guidelines There are no user guidelines for this command. Example none See Also none 212 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01