Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 49
show media linecard, Synopsis, Operands, Defaults, Command, Modes, Description, Usage, Guidelines
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
show media linecard 2 show media linecard Synopsis Operands Displays the SFP information for all the interfaces of a specific line card. show media linecard number number Linecard number. Defaults There are no default configurations for this command. Command Privileged EXEC mode Modes Description Use this command to display a summary of the SFP information for a specific line card. The output contains information for each interface on the line card, and is several pages long. Usage There are no usage guidelines for this command. Guidelines Examples To show the SFP information for line card number 0: switch#show media linecard 0 Interface InTenGigabitEthernet 0/1 Identifier 3 SFP Connector 7 LC Transceiver 0000000000000010 10_GB/s Name id Encoding 6 Baud Rate 103 (units 100 megabaud) Length 9u 0 (units km) Length 9u 0 (units 100 meters) Length 50u 8 (units 10 meters) Length 62.5u 3 (units 10 meters) Length Cu 0 (units 1 meter) Vendor Name BROCADE Vendor OUI 42:52:4f Vendor PN 57-0000075-01 Vendor Rev A Wavelength 850 (units nm) Options 001a Loss_of_Sig,Tx_Fault,Tx_Disable BR Max 0 BR Min 0 Serial No AAA108454100431 Date Code 081108 Temperature 44 Centigrade Voltage 3246.8 (Volts) Current 0.002 (mAmps) TX Power 0.1 (uWatts) RX Power 0.1 (uWatts) (output truncated) See Also show media interface, show media Dell Converged Enhanced Ethernet Command Reference 33 53-1002115-01