Dell PowerEdge M520 Dell Converged Enhanced Ethernet Command Reference - Page 149

Layer 2 System Commands Chapter 8 mac-address-table Synopsis Operands Use this command to set the aging time or to add static addresses to the MAC address table. mac-address-table {aging-time seconds| static mac-addr forward [port-channel number | {in | ex}tengigabitethernet slot/port | vlan vlan_id]} no mac-address-table {aging-time | static mac-addr forward [port-channel number | {in | ex}tengigabitethernet slot/port | vlan vlan_id]} aging-time seconds Specifies the time in seconds that a learned MAC address will persist after the last update. If the aging time is set to zero (0), it means that aging is disabled. The range of valid values is 10-100000. static mac-addr Specifies the Media Access Control (MAC) address (unicast or multicast) to add to the address table. Packets with this destination address received in the specified VLAN are forwarded to the specified interface. forward Forwards the MAC address to the interface. port-channel number Specifies the port-channel number. The range of valid values is 1 to 63. extengigabitethernet Specifies a valid external 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. intengigabitethernet Specifies a valid internal 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. vlan vlan_id Specifies the VLAN number. The range of valid values is 1-3583. Defaults The default aging time is 300 seconds. Command Global configuration mode Modes Description Use this command to set the aging time or to add static addresses to the MAC address table. Usage The vlan keyword is mandatory because the switch only supports independent VLAN learning (IVL). Guidelines Dell Converged Enhanced Ethernet Command Reference 133 53-1002115-01