Epson PowerLite Pro G5350 User's Guide - Page 130
Checking Lamp Usage, Replacing the Batteries
View all Epson PowerLite Pro G5350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Checking Lamp Usage To check the number of hours the lamp has been used, press the Menu button and highlight the Info menu. You see a screen like this: note The information displayed depends on the input signal currently selected. caution When replacing batteries, take the following precautions: ■ Replace the batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash immediately. ■ Do not expose batteries to heat or flame. ■ Dispose of used batteries according to local regulations. ■ Do not use batteries other than those specified in this User's Guide and do not use batteries of different types or mix old and new batteries. ■ Keep these batteries out of the reach of children. Batteries are choking hazards and are very dangerous if swallowed. The life span of the lamp is about 2000 hours if the Brightness Control setting in the Settings menu is set to High (default), and 3000 hours if the Brightness Control setting is set to Low. Make sure you have a spare lamp handy if the usage hours on this menu are close to the life span of your lamp. Replacing the Batteries Replace the batteries in the remote control as described below: 1. Turn the remote control over. 2. Press down on the tab on the battery cover as you lift the cover off. 130 Maintaining the Projector