Epson PowerLite Pro Z8255NL User Manual - Page 133
ESC/VP21 Commands, Serial Connection, Communications Protocol, Command List, RS-232C
View all Epson PowerLite Pro Z8255NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
ESC/VP21 Commands ESC/VP21 Commands Serial Connection • Connector shape: D-Sub 9-pin (male) • Projector input port name: RS-232C 133 Communications Protocol • Default baud rate setting: 9600 bps • Data length: 8 bit • Parity: None • Stop-bit: 1 bit • Flow control: None Command List When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned. When a command is input, the projector executes the command and returns a ":", and then accepts the next command. (PC serial cable) Signal Name GND TD RD Signal wire ground Transmit data Receive data Function
ESC/VP21 Commands
133
ESC/VP21 Commands
Serial Connection
•
Connector shape: D-Sub 9-pin (male)
•
Projector input port name:
RS-232C
Communications Protocol
•
Default baud rate setting: 9600 bps
•
Data length: 8 bit
•
Parity: None
•
Stop-bit: 1 bit
•
Flow control: None
Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
<At the projector>
<At the computer>
<At the projector>
(PC serial cable)
<At the computer>
Signal
Name
Function
GND
Signal wire ground
TD
Transmit data
RD
Receive data