Epson PowerLite Pro Z8255NL User Manual - Page 174
Settings for Multiple Projectors
View all Epson PowerLite Pro Z8255NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Settings for Multiple Projectors 174 q • Operation using the remote control is possible only for projectors that are within the operating range of the remote control. s "Operating range of remote control" p.23 • When Remote Control Type is set to Simple from Operation in the configuration menu, you cannot set the remote control ID. s p.67 • IDs are ignored when the projector ID is set to Off or the remote control ID is set to 0. Setting the projector ID Procedure A During projection, press the [Menu] button and select Extended - "Multi-Projection" from the configuration menu. s "Using the Configuration Menu" p.55 Remote Control B Select "Projector ID", and then press the [Enter] button. C Select of one of the numbers from 1 to 9 to use as the ID and then press the [Enter] button. D Press the [Menu] button to close the configuration menu. Checking the Projector ID Use the following procedure to check the projector ID.