Epson PowerLite Pro Z8255NL User Manual - Page 144
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point, Connection Setup
View all Epson PowerLite Pro Z8255NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point 144 Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point There are two methods for setting WPSg. • Push Button Method SSID and security are set automatically when the [Enter] button is pressed on the projector's control panel and the dedicated button on the access point equipment. This method is recommended when the projector and access point are close together. • PIN Code Method SSID and security are set automatically by inputting an 8-digit code that was assigned to the projector from the computer to the access point in advance. Make connection settings between the computer and the access point in advance. For details on how to make this connection, refer to the manual provided with the access point. This method is recommended when the projector is mounted on the ceiling. q Refer to the documentation for the access point device and to the following section when using any connection method other than WPS. s "Wireless LAN Menu" p.74 Connection Setup Method Procedure A During projection, press the [Menu] button and select "Network" - "Network Configuration" from the configuration menu. The Network Configuration screen is displayed.