Epson PowerLite Pro Z8255NL User Manual - Page 75

Network Menu 75 Sub Menu SSID Search Access Point Channel SSID Display DHCP IP Address Subnet Mask Gateway Address IP Address Display Region Code Function Enter an SSID. When an SSID is provided for the wireless WLAN network in which the projector participates, enter the SSID. You can enter up to 32 single-byte alphanumeric characters. When Connection Mode is set to Advanced, you can search for surrounding access points, and set the SSID to be connected from those access points. Depending on the access point settings, they may not be displayed in the list. You must set security separately. s p.76 You can select the channels used to connect in Quick mode. If interference from other signals occurs, use a different channel. To prevent the SSID from being displayed on the LAN Standby screen, set this to Off. You can set whether or not (On/Off) to use DHCPg. If this is set to On you cannot set any more addresses. You can input the IP addressg assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) You can input the Subnet Maskg for the projector. You can input a number from 0 to 255 in each field of the address. However, the following subnet masks cannot be used. 0.0.0.0, 255.255.255.255 You can input the IP address for the gateway for the projector. You can input a number from 0 to 255 in each field of the address. However, the following Gateway addressesg cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) To prevent the IP address from being displayed on the LAN Standby screen, set this to Off. This is a specific string of the wireless LAN module.