HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 17
Verify Hardware Operation, Status Indicator Lights LEDs - configure
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Note The 170X does not have a power switch. It is turned on when power is connected through the power module. 3. Plug the DC power cord from the power module into the power port. 4. Plug the 170X power module into a wall outlet. The 170X should now be turned on. Verify Hardware Operation Status Indicator Lights (LEDs) On the top of the 170X are Status and LAN Activity LEDs. Verify that the Status LED is on or blinking. Table 2.1 LEDs If the Status LED is... Off On On Off Blinking On And the Activity LED is... Off Off Blinking On (Solid) Off On Then the print server is... Not receiving power. On; no LAN activity detected. On; LAN activity detected. Encountering a fault during self-test or operation. Encountering one of the following conditions: O running a self-test. O not configured. O not able to attach to the network. On; heavy LAN activity detected. For troubleshooting information, see Chapter 5. ENWW Installation 2-17