HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 78
HP Jetdirect Configuration Messages, Table 6.2, General HP Jetdirect Messages 10 of 13
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Table 6.2 General HP Jetdirect Messages (10 of 13) Message Description READY The HP Jetdirect print server has successfully connected to the server and is awaiting data. RECEIVE BUFFER ERROR Run the power-on self-test: turn the print server off, then on again. If the error persists, replace the HP Jetdirect print server. RETRY ERROR Check the Ethernet cable. Make sure your HP Jetdirect print server is correctly attached to your network. SQE ERROR Run the power-on self-test: turn the print server off, then on again. If the error persists, replace the HP Jetdirect print server. TFTP IN PROGRESS The HP Jetdirect print server is currently in the process of obtaining its basic IP configuration information through TFTP and has not detected any errors. TFTP LOCAL ERROR The TFTP transfer of the configuration file from the host to the HP Jetdirect print server failed due to some form of inactivity timeout, or excessive retransmissions. TFTP REMOTE ERROR The TFTP transfer of the configuration file from the host to the HP Jetdirect print server failed with the remote host sending a TFTP ERROR packet to the print server. TFTP RETRIES EXCEEDED The overall retrying of the TFTP transfer of the configuration file from the host to the HP Jetdirect print server has exceeded a retry limit. TRANSMIT ERROR Check the network topology and verify all cable segments. TRYING TO CONNECT TO SERVER The HP Jetdirect print server is trying to connect to the print server or NetWare file server after being configured. Wait for the print server to establish a connection with the print or file server. 6-78 HP Jetdirect Configuration Page Messages ENWW