HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 68
HP Jetdirect Configuration Messages, Table 6.1, HP Jetdirect Product Information - jetdirect firmware
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Table 6.1 HP Jetdirect Product Information Message Description HP JETDIRECT JXXXXX Identifies the HP Jetdirect print server model number. FIRMWARE REVISION: X.XX.XX The firmware revision number of the HP Jetdirect print server currently installed in the printer (for example, F.08.56). LAN HW ADDRESS: XXXXXXXXXXXX The 12-digit hexadecimal network address of the HP Jetdirect print server. PARALLEL PORT: (HP 170X print servers have a single parallel port, port 1) CENTRONICS indicates a standard parallel connection that transfers data in one direction only (to the printer). BIDIRECTIONAL indicates a parallel connection that supports bidirectional communications. MLC, ECP2/MLC, ECP2/1284.3, 1284.3, ECP2/ 1284.4 or 1284.4 indicates a bidirectional parallel connection (IEEE-1284) that supports an enhanced capabilities port. MFG ID: The manufacturing identification code. DATE MANUFACTURED Identifies the date of manufacture of the HP Jetdirect print server. PORT SELECT: Specifies the LAN port on the print server that has been detected for use: RJ-45. WEBJA SERVER xxx.xxx.xxx.xxx If NONE or DISCONNECTED is displayed, verify that the network cable has been properly attached to the desired port. If displayed, identifies the IP address or domain name of the server that the HP Jetdirect print server uses for Web Jetadmin services. 6-68 HP Jetdirect Configuration Page Messages ENWW