HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 74

HP Jetdirect Configuration Messages, Table 6.2, General HP Jetdirect Messages 6 of 13

Get HP 170X - JetDirect Print Server PDF manuals and user guides
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

Table 6.2 General HP Jetdirect Messages (6 of 13) Message LAN ERROR-RETRY FAULTS LAN ERRORTRANSMITTER OFF LAN ERRORUNDERFLOW LAN ERROR-WIRE FAULT LATE COLLISION ERROR LOSS OF CARRIER ERROR MEMORY ERROR NDS AUTHENTICATION ERROR NDS CONNECTION STATE ERROR Description There is a problem with your network cabling or external network configuration. Check the network cables and connections. Verify operation of the hub or switch port. There may be a problem with your network cabling or the HP Jetdirect print server. Check the cabling and connectors on your Ethernet network. If you cannot find a problem with your network cabling, run the power-on self-test: turn the print server off, then on again. If the error persists, there is a problem with the HP Jetdirect print server. There may be a problem with your network cabling or the HP Jetdirect print server. Check the cabling and connectors on your network. If you cannot find a problem with your network cabling, run the power-on self-test: turn the print server off, then on again. If the error persists, there is a problem with the HP Jetdirect print server. There is a problem with the network cabling. Check the cabling between the printer and the network. Check the network topology, verify all cable segments, and make sure no segment is too long. Check the network connections. If the connections are intact, run the power-on self-test: turn the print server off, then on again. If the error persists, replace the HP Jetdirect print server. Run the power-on self-test: turn the print server off, then on again. If the error persists, replace the HP Jetdirect print server. Unable to log onto the NetWare directory tree. Make sure that the print server object is defined in the directory at the correct context. The HP Jetdirect print server cannot change the NDS connection state. Check licenses on the spooling server. 6-74 HP Jetdirect Configuration Page Messages ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
6-74 HP Jetdirect Configuration Page Messages
ENWW
LAN ERROR-RETRY
FAULTS
There is a problem with your network cabling or
external network configuration. Check the network
cables and connections. Verify operation of the hub
or switch port.
LAN ERROR-
TRANSMITTER OFF
There may be a problem with your network cabling or
the HP Jetdirect print server. Check the cabling and
connectors on your Ethernet network. If you cannot
find a problem with your network cabling, run the
power-on self-test: turn the print server off, then on
again. If the error persists, there is a problem with the
HP Jetdirect print server.
LAN ERROR-
UNDERFLOW
There may be a problem with your network cabling or
the HP Jetdirect print server. Check the cabling and
connectors on your network. If you cannot find a
problem with your network cabling, run the power-on
self-test: turn the print server off, then on again. If the
error persists, there is a problem with the HP
Jetdirect
print server.
LAN ERROR-WIRE
FAULT
There is a problem with the network cabling. Check
the cabling between the printer and the network.
LATE COLLISION
ERROR
Check the network topology, verify all cable
segments, and make sure no segment is too long.
LOSS OF CARRIER
ERROR
Check the network connections. If the connections
are intact, run the power-on self-test: turn the print
server off, then on again. If the error persists, replace
the HP Jetdirect print server.
MEMORY ERROR
Run the power-on self-test: turn the print server off,
then on again. If the error persists, replace the
HP Jetdirect print server.
NDS
AUTHENTICATION
ERROR
Unable to log onto the NetWare directory tree. Make
sure that the print server object is defined in the
directory at the correct context.
NDS CONNECTION
STATE ERROR
The HP
Jetdirect print server cannot change the NDS
connection state. Check licenses on the spooling
server.
Table 6.2
General HP Jetdirect Messages (6 of 13)
Message
Description