HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 71
HP Jetdirect Configuration Messages 6-71, Table 6.2, General HP Jetdirect Messages 3 of 13 - jetdirect default
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Table 6.2 General HP Jetdirect Messages (3 of 13) Message ERR NEGOTIATING BUFFER SIZE Description A failure was detected when selecting the buffer size to be used when reading print data from the file server. This may indicate a network problem. FAIL RESERVING PRINTER NUM FRAMING ERROR INITIALIZING TRYING TO CONNECT TO SERVER INVALID GATEWAY ADDRESS INVALID IP ADDRESS INVALID SERVER ADDRESS INVALID SUBNET MASK When the HP Jetdirect print server is configured for multiple file servers, the error is only displayed on the configuration page if none of the file servers was successfully connected. The SPX connection to the print server was lost when the HP Jetdirect print server attempted to reserve the printer number. This indicates a possible network problem, or a problem with the print server. Make sure all cables and routers are functioning correctly. Try restarting the print server. Check the network topology and verify all cable segments. Check for damaged cables. The HP Jetdirect print server is trying to connect to the NetWare server(s). This is a normal message. Wait until the connection is established or another status message appears. The default gateway IP address specified for the HP Jetdirect print server (through BOOTP or NOVRAM) is an invalid IP address for specifying a single node. The IP address specified for the HP Jetdirect print server (through BOOTP or NOVRAM) is an invalid IP address for specifying a single node. The TFTP server IP address specified for the HP Jetdirect print server (through BOOTP) is an invalid IP address for specifying a single node. The IP subnet mask specified for the HP Jetdirect print server (through BOOTP or NOVRAM) is an invalid subnet mask. ENWW HP Jetdirect Configuration Page Messages 6-71