HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 43
TCP/IP Configuration 3-43, server is re-initialized and all current - reset
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Note If the DHCP configuration state is changed from disabled to enabled, the print server assumes it should acquire its configuration information from a DHCP server. This means that when the session is completed or the print server is reset, the TCP/IP protocol for the print server is re-initialized and all current configuration information is deleted. The print server then attempts to acquire new configuration information by sending DHCP requests on the network to a DHCP server. ENWW TCP/IP Configuration 3-43
TCP/IP Configuration 3-43
ENWW
Note
If the DHCP configuration state is changed
from disabled to enabled, the print server
assumes it should acquire its configuration
information from a DHCP server. This means
that when the session is completed or the print
server is reset, the TCP/IP protocol for the print
server is re-initialized and all current
configuration information is deleted. The print
server then attempts to acquire new
configuration information by sending DHCP
requests on the network to a DHCP server.