HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 56

Moving to Another Network - jetdirect cold reset

Get HP 170X - JetDirect Print Server PDF manuals and user guides
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Moving to Another Network When moving an HP Jetdirect print server that is configured with an IP address to a new network, make sure that the IP address does not conflict with addresses on the new network. You may change the IP address of the print server to one that can be used on the new network, or erase the current IP address and configure another address after you are installed on the new network. Cold reset the print server (see Chapter 5 for instructions). If the current BOOTP server is not reachable, you may need to locate a different BOOTP server and configure the printer to this server. If the print server was configured using BOOTP, DHCP or RARP, edit the appropriate system files with updated settings. If the IP address was manually set (for example, Telnet), reconfigure IP parameters as described in this chapter. 3-56 TCP/IP Configuration ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
3-56 TCP/IP Configuration
ENWW
Moving to Another Network
When moving an HP Jetdirect print server that is configured
with an IP address to a new network, make sure that the IP
address does not conflict with addresses on the new network.
You may change the IP address of the print server to one that
can be used on the new network, or erase the current IP address
and configure another address after you are installed on the
new network. Cold reset the print server (see
Chapter 5
for
instructions).
If the current BOOTP server is not reachable, you may need to
locate a different BOOTP server and configure the printer to
this server.
If the print server was configured using BOOTP, DHCP or
RARP, edit the appropriate system files with updated settings.
If the IP address was manually set (for example, Telnet),
reconfigure IP parameters as described in this chapter.