HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 27
TCP/IP Configuration 3-27, take longer for the IP address to take effect. The default IP - jetdirect telnet
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
O By using the arp and ping commands from your system. O By setting configuration parameters using Telnet. In order to set configuration parameters, set up a Telnet connection from your system to the HP Jetdirect print server using the default IP address. The default IP address takes effect two minutes after the printer is turned on (if none of the other configuration methods have been used). (Older products may take longer for the IP address to take effect.) The default IP address is 192.0.0.192. If Telnet is used, the print server saves the configuration even if the printer or print server is turned off. O By browsing to the embedded Web server on the HP Jetdirect print server and setting the configuration parameters. ENWW TCP/IP Configuration 3-27