HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 73

HP Jetdirect Configuration Messages 6-73, Table 6.2, General HP Jetdirect Messages 5 of 13 - jetdirect test page

Get HP 170X - JetDirect Print Server PDF manuals and user guides
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

Table 6.2 General HP Jetdirect Messages (5 of 13) Message Description LAN ERROREXTERNAL LOOPBACK The HP Jetdirect print server is incorrectly connected to your network or is defective. Make sure your HP Jetdirect print server is correctly attached to your network. In addition, check the cabling and connectors. LAN ERROR-INFINITE DEFERRAL There is a network congestion problem. Check network cables. Note: If the print server is not connected to the network, this error cannot occur. LAN ERROR- Check all network connections. INTERNAL LOOPBACK LAN ERROR-LOSS OF CARRIER Check the network connections. If the connections are intact, run the power-on self-test: turn the print server off, then on again. If the error persists, replace the HP Jetdirect print server. LAN ERROR-NO LINKBEAT This message is displayed if Link Beat is not sensed. Check the network cable, and verify that the concentrator/hub is providing Link Beat. LAN ERROR-NO SQE Check the network connections. If the connections are intact, run the power-on self-test: turn the print server off, then on again. If the error persists, replace the HP Jetdirect print server. LAN ERRORRECEIVER OFF There may be a problem with your network cabling or the HP Jetdirect print server. Check the cabling and connectors on your Ethernet network. If you cannot find a problem with your network cabling, run the power-on self-test: turn the print server off, then on again. If the error persists after the printer is turned on again, there is a problem with the HP Jetdirect print server. LAN ERROR-REMOVE RECEIVE Run the power-on self-test: turn the print server off, then on again. If this message reappears on the resulting configuration page, you may have a problem with one of the HP Jetdirect print servers on your network. Check all the HP Jetdirect print servers on the network for proper operation. ENWW HP Jetdirect Configuration Page Messages 6-73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
HP Jetdirect Configuration Page Messages 6-73
ENWW
LAN ERROR-
EXTERNAL
LOOPBACK
The HP
Jetdirect print server is incorrectly connected
to your network or is defective. Make sure your
HP Jetdirect print server is correctly attached to your
network. In addition, check the cabling and
connectors.
LAN ERROR-INFINITE
DEFERRAL
There is a network congestion problem. Check
network cables.
Note:
If the print server is not connected to the
network, this error cannot occur.
LAN ERROR-
INTERNAL LOOPBACK
Check all network connections.
LAN ERROR-LOSS OF
CARRIER
Check the network connections. If the connections
are intact, run the power-on self-test: turn the print
server off, then on again. If the error persists, replace
the HP Jetdirect print server.
LAN ERROR-NO
LINKBEAT
This message is displayed if Link Beat is not sensed.
Check the network cable, and verify that the
concentrator/hub is providing Link Beat.
LAN ERROR-NO SQE
Check the network connections. If the connections
are intact, run the power-on self-test: turn the print
server off, then on again. If the error persists, replace
the HP Jetdirect print server.
LAN ERROR-
RECEIVER OFF
There may be a problem with your network cabling or
the HP Jetdirect print server. Check the cabling and
connectors on your Ethernet network. If you cannot
find a problem with your network cabling, run the
power-on self-test: turn the print server off, then on
again. If the error persists after the printer is turned
on again, there is a problem with the HP
Jetdirect print
server.
LAN ERROR-REMOVE
RECEIVE
Run the power-on self-test: turn the print server off,
then on again. If this message reappears on the
resulting configuration page, you may have a problem
with one of the HP Jetdirect print servers on your
network. Check all the HP Jetdirect print servers on
the network for proper operation.
Table 6.2
General HP Jetdirect Messages (5 of 13)
Message
Description