HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 77
HP Jetdirect Configuration Messages 6-77, Table 6.2, General HP Jetdirect Messages 9 of 13 - jetdirect configuration utility
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Table 6.2 General HP Jetdirect Messages (9 of 13) Message PASSWORD ERROR Description The HP Jetdirect print server detected that the password for the NetWare print server object is wrong. Use the PCONSOLE utility to erase the password for the print server object. When the HP Jetdirect print server logs on again, it sets a new password. POSTSCRIPT MODE NOT SELECTED or POSTSCRIPT UPDATE NEEDED PRINT SERVER NOT DEFINED Note: When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers are connected. The printer does not support the EtherTalk extensions. It may be a printer which does not support AppleTalk. When this message is displayed, the other AppleTalk messages (ADDRESS, APPLETALK NAME, ZONE NAME) are not displayed. The file server does not have a print server object that corresponds to the specified NetWare node name. Use appropriate NetWare tools to create the print server object. PRINTER NUMBER IN USE PRINTER NUMBER NOT DEFINED PSERVER CLOSED CONNECTION When the HP Jetdirect print server is configured for multiple file servers, the error is only displayed on the configuration page if none of the file servers made the connection. The printer number assigned to the printer is already in use by another printer. Assign an unused printer number. This may also occur when a printer is power cycled, in which case the error goes away after the print server times out and detects the lost connection. The printer number you assigned to the remote printer has not been defined. Assign a valid printer number using appropriate NetWare tools. The network server requested a termination of the connection with the HP Jetdirect print server. No error exists or is indicated. Make sure the print server is running, and restart it if necessary. ENWW HP Jetdirect Configuration Page Messages 6-77