HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 81
HP Jetdirect Configuration Messages 6-81, Table 6.3, Network Statistics
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Table 6.2 General HP Jetdirect Messages (13 of 13) Message UNABLE TO SET PASSWORD Description A failure was detected when the HP Jetdirect print server tried to set the password for the print server object. (Whenever the HP Jetdirect print server is able to log in without a password, it sets the password automatically.) This indicates a networking or security problem. Create a new print server object. When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers were successfully connected. UNDERFLOW ERROR Check the cabling and connectors. If the error persists, run the power-on self-test: turn the print server off, then on again. If the error persists, replace the HP Jetdirect print server. UNEXPECTED PSERVER DATA RCVD The HP Jetdirect print server received data without providing permission to do so. This indicates a possible software problem. UNKNOWN NCP RETURN CODE The HP Jetdirect print server encountered an unexpected fatal error after it had successfully connected to the file server. A wide variety of failures could produce this error message, including a downed file server or a network router failure. Table 6.3 Network Statistics (1 of 2) Message UNICAST PACKETS RCVD: Description Number of frames specifically addressed to this HP Jetdirect print server. This does not include broadcasts or multicasts. ENWW HP Jetdirect Configuration Page Messages 6-81