HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 35
TCP/IP Configuration 3-35, 1st floor, south, public - what is default ip
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Table 3.2 TFTP Configuration File Parameters (2 of 3) location: Identifies the physical location of the printer (SNMP sysLocation object). Only printable ASCII characters are allowed. The maximum length is 64 characters. The default location is undefined. (Example: 1st floor, south wall) contact: ASCII character string that identifies the person who administers or services the printer (SNMP sysContact object). This may include how to contact this person. The default contact is undefined. get-communityname: Specifies a password that determines which SNMP GetRequests the HP Jetdirect print server will respond to. This is optional. The community name must be ASCII characters. The maximum length is 32 characters. set-communityname: Specifies a password that determines which SNMP SetRequests (control functions) the HP Jetdirect print server will respond to. The community name of an incoming SNMP SetRequest must match the print server's "set community name" for the print server to respond. SetRequests must come from hosts that are configured in the print server's host access list. Community names must be ASCII characters. The maximum length is 32 characters. trap-dest: Enters a host's IP address into the HP Jetdirect print server's SNMP trap destination list. If the list is empty, the print server does not send SNMP traps. The list may contain up to four entries. The default SNMP Trap Destination List is empty. To receive SNMP traps, the systems listed on the SNMP trap destination list must have a trap daemon to listen to those traps. trap-communityname: Community name (password) included with SNMP traps that are sent by the HP Jetdirect print server to a host computer. The default community name is public. Community names must be ASCII characters. The maximum length is 32 characters. authenticationtrap: Configures the print server to send (on) or not send (off) SNMP authentication traps. Authentication traps indicate that an SNMP request was received, but the community name check failed. The default is "off." ENWW TCP/IP Configuration 3-35