HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 45
TCP/IP Configuration 3-45, Turn the printer on. - jetdirect lan
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
6. Edit the /etc/hosts file to add your designated IP address and node name for the HP Jetdirect print server. For example: 192.168.0.1 laserjet1 7. Edit the /etc/ethers file (/etc/rarpd.conf file in HPUX 10.20) to add the LAN hardware address/station address (from the configuration page) and the node name for the HP Jetdirect print server. For example: 00:60:b0:a8:b0:00 laserjet1 Note If your system uses Network Information Service (NIS), you need to incorporate changes to the NIS host and ethers databases. 8. Turn the printer on. 9. To verify that the card is configured with the correct IP address, use the ping utility. At the prompt, type: ping where is the assigned address from RARP. The default IP address is 192.0.0.192. 10. If ping does not respond, see Chapter 5. ENWW TCP/IP Configuration 3-45