HP 170X HP Jetdirect Print Server 170X Installation and Configuration - Page 86
HP Jetdirect Configuration Messages, Table 6.6, TCP/IP Configuration Messages 2 of 2 - jetdirect print config
UPC - 882780300699
View all HP 170X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Table 6.6 TCP/IP Configuration Messages (2 of 2) Message SYSLOG SERVER: IDLE TIMEOUT: BOOTP SERVER DHCP SERVER CONFIG FILE: Description Marks the IP address of the syslog server configured on the print server. NOT SPECIFIED indicates no syslog server has been configured, or the syslog server IP address is zero. The timeout value expressed in seconds after which the print server closes an idle TCP print data connection. Acceptable values are integers between 0 and 3600. A value of zero turns off the timeout mechanism. The IP address of the system that responds to the print server's BOOTP request with configuration data. This parameter is omitted when the print server is not configured using BOOTP. NOT SPECIFIED indicates that the server's IP address field in the BOOTP reply packet was zero. The IP address of the system that responds to the print server's DHCP request with configuration data. This parameter is omitted when the print server is not configured using DHCP. The name of the HP Jetdirect configuration file. The file pathname may be truncated to fit on two lines. This parameter is omitted when the print server is configured from the printer's control panel. NOT SPECIFIED indicates that a file was not specified in the BOOTP reply from the host. 6-86 HP Jetdirect Configuration Page Messages ENWW