HP 635n HP Jetdirect Print Server Administrator's Guide (Firmware V.36) - Page 130
To Disable a Jetdirect Embedded Print Server (V.36.xx - jetdirect eio
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
To Disable a Jetdirect Embedded Print Server (V.36.xx) NOTE: HP Jetdirect EIO and external print servers can be disabled by disconnecting them from the printer/MFP. You can disable an HP Jetdirect embedded print server by using the printer/MFP Service menu. This feature can help to isolate faults to either the printer or the print server. 1. Turn the printer on and watch for the memory count to begin. 2. Press and hold the Select button (or the "6" button on MFPs with numeric keypads only) until the three control panel lights (Ready, Data, Attention) blink and then remain on. 3. Release the Select button (or "6" button). The control panel will display Select. 4. Press the down arrow M button (or "9" button) until Embedded LAN disable appears. 5. Press the Select button (or "6" button) to perform disable the embedded print server and then continue its power-on sequence. 6. Verify whether the printer/MFP properly completes its power-on sequence. To enable the embedded print server, use the same instructions except select Embedded LAN enable in step 4 above. 120 Chapter 7 Troubleshooting the HP Jetdirect Print Server ENWW