HP 635n HP Jetdirect Print Server Administrator's Guide (Firmware V.36) - Page 180
Jetdirect Menus for Graphical Control Panels
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Jetdirect Menus for Graphical Control Panels Newer printer/MFP devices support graphical control panels, which may consist of a numeric keypad, navigation buttons and touch-screen displays. For Jetdirect menus, graphical control panels typically display 18 characters on a line, and as many as four lines at a time. In addition, scrolling may be supported to allow display of additional lines. NOTE: These menus apply to printers/MFPs with a Jetdirect embedded print server, or that contain a EIO slot in which a Jetdirect EIO print is installed. The menu items displayed depend on the features supported by the print server. Figure C-1 Example of Graphical Control Panel Table C-1 Jetdirect EIO Menu on Graphical Control Panel Menu item Sub-menu item Sub-menu item TCP/IP Enable Host Name IPv4 Settings Config Method DHCP Release Values and Description Off: Disable the TCP/IP protocol. On (default): Enable the TCP/IP protocol. An alphanumeric string, up to 32 characters, used to identify the device. This name is listed on the HP Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. NOTE: Names, such as host names, must begin with a letter and can contain only letters, numbers, periods (for domain names only), or hyphens. The underline character (_) is not allowed. Specifies the method that TCP/IPv4 parameters will be configured on the HP Jetdirect print server. BootP: Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. DHCP (default): Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCPv4 server. If selected and a DHCP lease exists, DHCP Release and DHCP Renew menus are available to set DHCP lease options. Auto IP: Use automatic link-local IPv4 addressing. An address in the form 169.254.x.x is assigned automatically. Manual: Use the Manual Settings menu to configure TCP/IPv4 parameters. This menu appears if Config Method was set to DHCP and a DHCP lease for the print server exists. 170 Appendix C HP Jetdirect Control Panel Menus (V.36.xx) ENWW