HP 635n HP Jetdirect Print Server Administrator's Guide (Firmware V.36) - Page 181

Jetdirect EIO Menu on Graphical Control Panel continued, Table C-1

Page 181 highlights

Table C-1 Jetdirect EIO Menu on Graphical Control Panel (continued) Menu item Sub-menu item Sub-menu item Values and Description No (default): The current DHCP lease is saved. Yes: The current DHCP lease and the leased IP address are released. DHCP Renew This menu appears if Config Method was set to DHCP and a DHCP lease for the print server exists. No (default): The print server does not request to renew the DHCP lease. Yes: The print server requests to renew the current DHCP lease. Manual Settings (Available only if Config Method is set to Manual) Configure parameters directly from the printer control panel: IP Address: The unique IP address of the printer, where n is a value from 0 to 255. Subnet Mask: The subnet mask for the printer, where m is a value from 0 to 255. Syslog Server: The IP address of the syslog server used to receive and log syslog messages. Default Gateway: The IP address of the gateway or router used for communications with other networks. Idle Timeout: The time period, in seconds, after which an idle TCP print data connection is closed (default is 270 seconds, 0 disables the timeout). Default IP Specify the IP address to default to when the print server is unable to obtain an IP address from the network during a forced TCP/IP reconfiguration (for example, when manually configured to use BootP or DHCP). Auto IP: A link-local IP address 169.254.x.x is set. Legacy: The address 192.0.0.192 is set, consistent with older HP Jetdirect devices. Primary DNS Specify the IP address (n.n.n.n) of a Primary DNS Server. NOTE: This item appears only if Manual configuration is a higher priority than DHCP in the Config Precedence table, configured through the embedded Web server. Secondary DNS Specify the IP address (n.n.n.n) of a Secondary Domain Name System (DNS) Server. NOTE: This item will appear only if Manual configuration is a higher priority than DHCP in the Config Precedence table, configured through the embedded Web server. IPv6 Settings Enable Use this item to enable or disable IPv6 operation on the print server. ENWW Jetdirect Menus for Graphical Control Panels 171

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202

Menu item
Sub-menu item
Sub-menu item
Values and Description
No
(default): The current DHCP lease is saved.
Yes
: The current DHCP lease and the leased IP
address are released.
DHCP Renew
This menu appears if
Config Method
was set to
DHCP
and a DHCP lease for the print server exists.
No
(default): The print server does not request to renew
the DHCP lease.
Yes
: The print server requests to renew the current
DHCP lease.
Manual Settings
(Available only if
Config Method
is set to
Manual
)
Configure parameters directly from the printer control
panel:
IP Address
: The unique IP address of the printer, where
n is a value from 0 to 255.
Subnet Mask
: The subnet mask for the printer, where
m is a value from 0 to 255.
Syslog Server
: The IP address of the syslog server
used to receive and log syslog messages.
Default Gateway
: The IP address of the gateway or
router used for communications with other networks.
Idle Timeout
: The time period, in seconds, after which
an idle TCP print data connection is closed (default is
270 seconds, 0 disables the timeout).
Default IP
Specify the IP address to default to when the print
server is unable to obtain an IP address from the
network during a forced TCP/IP reconfiguration (for
example, when manually configured to use BootP or
DHCP).
Auto IP
: A link-local IP address 169.254.x.x is set.
Legacy
: The address 192.0.0.192 is set, consistent
with older HP Jetdirect devices.
Primary DNS
Specify the IP address (n.n.n.n) of a Primary DNS
Server.
NOTE:
This item appears only if
Manual
configuration is a higher priority than
DHCP
in
the
Config Precedence
table, configured
through the embedded Web server.
Secondary DNS
Specify the IP address (n.n.n.n) of a Secondary
Domain Name System (DNS) Server.
NOTE:
This item will appear only if
Manual
configuration is a higher priority than
DHCP
in
the
Config Precedence
table, configured
through the embedded Web server.
IPv6 Settings
Enable
Use this item to enable or disable IPv6 operation on the
print server.
Table C-1
Jetdirect EIO Menu on Graphical Control Panel (continued)
ENWW
Jetdirect Menus for Graphical Control Panels
171