Home » HP Manuals » Print Servers » HP 635n » Manual Viewer

HP 635n HP Jetdirect Print Server Administrator's Guide (Firmware V.36) - Page 82

Advanced, Clear Previous Values and Reinitialize Now

UPC - 882780301016

Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

TFTP Manual Default 3. Press Clear Previous Values and Reinitialize Now. Advanced This tab provides configuration of additional TCP/IP parameters described below. Table 4-8 TCP/IP Advanced tab Item Description Idle Timeout (IPv4 or IPv6) Specifies the number of seconds that an idle connection is allowed to remain open. Up to 3600 seconds can be set. 270 is the default value. If set to 0, the timeout is disabled and TCP/IP connections will remain open until closed by the device at the other end of the network (for example, a workstation). LPD Banner Page (IPv4 or IPv6) Specifies whether to enable or disable printing of an LPD banner page for print jobs. For currently supported print servers, only a single port is available (Port 1). System Contact (IPv4 or IPv6) Identifies a person who is assigned to administer or service this device. This field may include a phone number or similar information. When configured, this parameter will be displayed on the Protocol Info page, and the HP Jetdirect Home tab if available. System Location (IPv4 or IPv6) Specifies the physical location of the device or related information. Only printable ASCII characters are allowed, up to 64 characters. When configured, this parameter will be displayed on the Protocol Info page, and the HP Jetdirect Home tab if available. Proxy Server (For printers/MFPs that support this feature) (IPv4 only) Specifies the proxy server to be used by embedded applications in your printer/MFP. A proxy server is typically used by network clients for Internet access. It caches Web pages, and provides a degree of Internet security, for those clients. To specify a proxy server, enter its IP address or fully-qualified domain name. The name can be up to 64 characters. For some networks, you may need to contact your Independent Service Provider (ISP) for the proxy server address. Proxy Server Port (For printers/MFPs that support this feature) (IPv4 only) Enter the port number used by the proxy server for client support. The port number identifies the port reserved for proxy activity on your network, and can be a value from 0 to 65535. Proxy Server User Name (For printers/MFPs that support this feature) (IPv4 only) If a user account on the proxy server has been set up, enter the name of the user account. Proxy Server Password (For printers/MFPs that support this feature) (IPv4 only) If a user account on the proxy server has been set up, enter the password of the user account. Proxy Server Exception List (For printers/MFPs that support this feature) 72 Chapter 4 Embedded Web Server (V.36.xx) ENWW

Section	Page
Introducing the HP Jetdirect Print Server	11
Supported Print Servers	11
Supported Network Protocols	12
Security Protocols	14
SNMP (IP and IPX)	14
HTTPS	14
Authentication	14
EAP/802.1X Server-Based Authentication	14
IPsec/Firewall	15
Supplied Manuals	15
HP Support	15
HP Online Support	15
Firmware Upgrades	15
Firmware Installation Tools	16
HP Support By Phone	16
Product Registration	16
Product Accessibility	17
HP Software Solutions Summary	19
HP Install Network Printer Wizard (Windows)	20
Requirements	20
HP Jetdirect Printer Installer for UNIX	20
HP Web Jetadmin	21
System Requirements	21
Installing HP Web Jetadmin	21
Verifying Installation and Providing Access	21
Configuring and Modifying a Device	21
Removing HP Web Jetadmin Software	22
Internet Printer Connection Software	22
HP-Supplied Software	22
HP Software System Requirements	22
HP Software Supported Proxies	23
Microsoft Supplied Software	23
Windows 2000/XP/Server 2003 Integrated Software	23
Novell Supplied Software	23
Mac OS Network Installation	24
TCP/IP Configuration	27
IPv6 Configuration	27
IPv6 Address Introduction	27
IPv6 Address Configuration	28
Link-Local Address	28
Stateless Addresses	28
Stateful Addresses	29
Using DNS	29
Tools and Utilities	30
IPv4 Configuration	30
Server-Based and Manual TCP/IP Configuration (IPv4)	30
Default IP Address (IPv4)	31
Default IP Address Will Not Be Assigned	31
Default IP Address Will Be Assigned	31
Default IPv4 Address Configuration Options	32
Default IPv4 Behavior	33
TCP/IP Configuration Tools	33
Using BOOTP/TFTP (IPv4)	34
Why Use BOOTP/TFTP?	34
BOOTP/TFTP on UNIX	35
Using DHCP (IPv4)	46
UNIX Systems	46
Windows Systems	47
To Discontinue DHCP Configuration	48
Using RARP (IPv4)	49
Using the arp and ping Commands (IPv4)	50
Using Telnet (IPv4)	51
Creating a Telnet Connection	51
A Typical Telnet Session	52
User Interface Options	53
Using Telnet to Erase the Existing IP Settings	68
Moving to Another Network (IPv4)	69
Using the Embedded Web Server	69
Using the Printer Control Panel	69
Embedded Web Server (V.36.xx)	71
Requirements	72
Compatible Web Browsers	72
Browser Exceptions	72
Supported HP Web Jetadmin Version	72
Viewing the Embedded Web Server	72
Operating Notes	74
HP Jetdirect Home Tab	74
Device Tabs	75
Networking Tab	75
Sending Product Information to HP	76
TCP/IP Settings	77
Summary	77
Network Identification	78
TCP/IP(v4)	79
TCP/IP(v6)	80
Config Precedence	81
Advanced	82
Network Settings	83
IPX/SPX	84
AppleTalk	85
DLC/LLC	86
SNMP	86
Other Settings	87
Misc. Settings	87
Firmware Upgrade	90
LPD Queues	90
USB Settings	92
Support Info	93
Refresh Rate	93
Privacy Settings	93
Select Language	94
Security: Settings	94
Status	94
Wizard	94
Restore Defaults	96
Authorization	96
Admin. Account	96
Certificates	97
Configuring Certificates	98
Access Control	100
Mgmt. Protocols	101
Web Mgmt.	101
SNMP	102
SNMP v3	102
Other	102
802.1X Authentication	103
IPsec/Firewall	105
Network Statistics	105
Protocol Info	105
Configuration Page	105
Other Links	105
? (Help)	105
Support	105
IPsec/Firewall Configuration (V.36.xx)	107
Default Rule Example	110
IPsec Security Associations (SA)	110
HP Jetdirect IPsec/Firewall Wizard	111
Limitations to Rules, Templates and Services	111
Step 1: Specify Address Template	112
Create Address Template	113
Step 2: Specify Service Template	113
Create Service Template	113
Manage Services	114
Manage Custom Services	114
Step 3: Specify Action	115
Specify IPsec/Firewall Template	116
Create IPsec Template	116
Identity Authentication	117
Kerberos	117
Kerberos Settings	118
IKEv1 Phase 1 (Authentication)	119
IKEv1 Phase 2 / Quick Mode (IPsec Protocols)	120
Advanced IKE Settings	120
IPsec Protocols (Manual Keys)	121
Manual Keys	121
Rule Summary	122
Configuring Windows Systems	122
Security Features (V.36.xx)	123
Using Security Features	126
Troubleshooting the HP Jetdirect Print Server	127
Resetting to Factory Defaults	128
Example: Cold Reset Using the Service Menu	129
To Disable a Jetdirect Embedded Print Server (V.36.xx)	130
General Troubleshooting	131
Troubleshooting Chart - Assessing the Problem	131
Procedure 1: Verifying that the Printer is On and Online	132
Procedure 2: Printing an HP Jetdirect Configuration Page	132
Procedure 3: Resolving Printer Display Error Messages	133
Procedure 4: Resolving Printer Communication Problems with the Network	134
HP Jetdirect Configuration Pages	137
HP Jetdirect Configuration Page	138
Status Field Error Messages	138
Configuration Page Format	138
Configuration Page Messages	139
HP Jetdirect Configuration/General Information	139
Security Settings	141
Network Statistics	143
TCP/IP Protocol Information	143
IPv4 Section	144
IPv6 Section	146
IPX/SPX Protocol Information	147
Novell/NetWare Parameters	147
AppleTalk Protocol Information	148
DLC/LLC Protocol Information	149
Error Messages	149
HP Jetdirect Security Page	156
Security Settings	157
IPsec Error Log	159
Local IP Addresses	159
IPsec Stats	159
IKE Stats	160
IPsec Rules	160
IPsec SA Table	160
Available Network Services	161
LPD Printing	163
About LPD	164
Requirements for Configuring LPD	164
LPD Setup Overview	165
Step 1. Setting Up IP Parameters	165
Step 2. Setting Up Print Queues	165
Step 3. Printing a Test File	166
LPD on UNIX Systems	166
Configuring Print Queues for BSD-based Systems	166
Configuring Print Queues Using SAM (HP-UX systems)	167
Printing a Test File	168
LPD on Windows 2000/Server 2003 Systems	169
Installing TCP/IP Software	169
Configuring a Network Printer for Windows 2000/Server 2003 Systems	170
Verifying the Configuration	171
Printing from Windows Clients	171
LPD on Windows XP Systems	171
Adding Windows Optional Networking Components	171
Configuring a Network LPD Printer	172
Adding a New LPD Printer	172
Creating an LPR Port for an Installed Printer	172
FTP Printing	175
Requirements	175
Print Files	175
Using FTP Printing	175
FTP Connections	175
Control Connection	175
Data Connection	176
FTP Login	176
Ending the FTP Session	177
Commands	177
Example of an FTP Session	178
HP Jetdirect Control Panel Menus (V.36.xx)	179
Jetdirect Menus for Graphical Control Panels	180
Jetdirect EIO Menus for Classic Control Panels	188
Open Source Licensing Statements	191
gSOAP	191
OpenSSL	192
OpenSSL License	192
Original SSLeay License	192

Match case Limit results 1 per page

TFTP

Manual

Default

Press

Clear Previous Values and Reinitialize Now

Advanced

This tab provides configuration of additional TCP/IP parameters described below.

Table 4-8

TCP/IP Advanced tab

Item

Description

Idle Timeout

(IPv4 or IPv6) Specifies the number of seconds that an idle connection is allowed to

remain open. Up to 3600 seconds can be set. 270 is the default value. If set to 0, the

timeout is disabled and TCP/IP connections will remain open until closed by the device

at the other end of the network (for example, a workstation).

LPD Banner Page

(IPv4 or IPv6) Specifies whether to enable or disable printing of an LPD banner page

for print jobs. For currently supported print servers, only a single port is available (Port

1).

System Contact

(IPv4 or IPv6) Identifies a person who is assigned to administer or service this device.

This field may include a phone number or similar information.

When configured, this parameter will be displayed on the

Protocol Info

page, and the

HP Jetdirect

Home

tab if available.

System Location

(IPv4 or IPv6) Specifies the physical location of the device or related information. Only

printable ASCII characters are allowed, up to 64 characters.

When configured, this parameter will be displayed on the

Protocol Info

page, and the

HP Jetdirect

Home

tab if available.

Proxy Server

(For printers/MFPs that support this feature)

(IPv4 only) Specifies the proxy server to be used by embedded applications in your

printer/MFP. A proxy server is typically used by network clients for Internet access. It

caches Web pages, and provides a degree of Internet security, for those clients.

To specify a proxy server, enter its IP address or fully-qualified domain name. The name

can be up to 64 characters.

For some networks, you may need to contact your Independent Service Provider (ISP)

for the proxy server address.

Proxy Server Port

(For printers/MFPs that support this feature)

(IPv4 only) Enter the port number used by the proxy server for client support. The port

number identifies the port reserved for proxy activity on your network, and can be a

value from 0 to 65535.

Proxy Server User Name

(For printers/MFPs that support this feature)

(IPv4 only) If a user account on the proxy server has been set up, enter the name of the

user account.

Proxy Server Password

(For printers/MFPs that support this feature)

(IPv4 only) If a user account on the proxy server has been set up, enter the password

of the user account.

Proxy Server Exception List

(For printers/MFPs that support this feature)

Chapter 4

Embedded Web Server (V.36.xx)

ENWW