HP 635n HP Jetdirect Print Server Administrator's Guide (Firmware V.36) - Page 147
IPX/SPX Protocol Information, Novell/NetWare Parameters, Table, IPX/SPX, Configuration Information
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
IPX/SPX Protocol Information Information in this section of the Jetdirect configuration page is described in Table 8-9 IPX/SPX Configuration Information on page 137. For error messages, see Table 8-13 Error Messages on page 140. Table 8-9 IPX/SPX Configuration Information Message Description STATUS Indicates the current IPX/SPX protocol status. READY: Indicates the HP Jetdirect print server is awaiting data over IPX/SPX. DISABLED: Indicates that IPX/SPX was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. An error code and message is displayed if the print server is not ready. For more information, see Table 8-13 Error Messages on page 140. PRIMARY FRAME TYPE Specifies the frame type selection on the Jetdirect print server. AUTO SELECT: The print server automatically senses and limits the frame type to the first one detected. EN_8023: Limits the frame type to IPX over IEEE 802.3 frames. All others will be counted and discarded. EN_II: Limits the frame type to IPX over Ethernet frames. All others will be counted and discarded. EN_8022: Limits the frame type to IPX over IEEE 802.2 with IEEE 802.3 frames. All others will be counted and discarded. EN_SNAP: Limits the frame type to IPX over SNAP with IEEE 802.3 frames. All others will be counted and discarded. NETWORK FRAME TYPE RCVD The first column (Network) indicates the network number associated with a protocol frame type used for communication between a server and the HP Jetdirect print server. UNKNOWN: Indicates that the HP Jetdirect print server is still trying to determine which network number to use. The second column (Frame Type) identifies the frame type used with the associated network number: EN_8023, EN_8022, EN_II, EN_SNAP. Unless a specific frame type has been manually configured, the print server automatically determines the protocol frame type by listening to the network data being transferred over the network. DISABLED: Indicates that a specific frame type for that network has been manually configured. The third column (RCVD) indicates how many packets have been received for each frame type. Novell/NetWare Parameters Information in this section of the Jetdirect configuration page is described in Table 8-10 Novell/NetWare Configuration Information on page 138. For error messages, see Table 8-13 Error Messages on page 140. ENWW HP Jetdirect Configuration Page 137