HP 8000dn Service Manual - Page 116
Tray Adjustment Procedure, Top
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Tray Adjustment Procedure Note This procedure applies to Trays 2 and 3 (the standard paper trays in the printer) and Trays 4 and 5 in the 2 x 500-sheet Input Tray. To adjust the 2000-sheet Input Tray (Tray 4) see page 94. The paper trays are mechanically aligned to the printer chassis at the factory. Perform this procedure ONLY if a paper tray has been replaced with a tray other than the original factory installed tray, or if the top margin of the image area is off-center more than 0.5 mm (0.02 inch). The adjustment procedure is identical for Trays 2 and 3. Before performing this procedure, check that the margins in your software application are properly set. 1 Load the paper tray being tested with letter or A4 size paper. 2 Perform a 1-sheet Paper Path Test from that tray (see Paper Path Test under Test Menu in Chapter 3). 3 See figure 4-1 and compare distance A to distance B. (Top Of Page) Figure 4-1 Image Area Margins 92 Chapter 4 Maintenance and Adjustments EN