HP 8000dn Service Manual - Page 84

Paper Handling Menu When paper handling settings are correctly configured through the control panel, you can print by choosing the type and size of paper from the printer driver or software application. Some items in this menu (such as duplex and manual feed) can be accessed from a software application, or from the printer driver (if the appropriate driver is installed). Printer driver and software application settings override control panel settings. Table 3-5. Paper Handling Menu Determine how the printer will use Tray 1. If paper is loaded in Tray 1, the printer will pull paper from that tray first. A paper size must be assigned to Tray 1 using the option (the next item in this menu when ). This allows Tray 1 to be used as a reserved tray. For supported This item appears only when paper sizes, see . Set the value to correspond with the page 4. paper size currently loaded in Tray 1. For supported paper types, see page 4. This item appears only when . Set the value to correspond with the paper type currently loaded in Tray 1. For supported paper types, see page 4. Set the value to correspond with the paper type currently loaded in Tray 2. For supported paper types, see page 4. Set the value to correspond with the paper type currently loaded in Tray 3. For supported paper types, see page 4. Set the value to correspond with the paper type currently loaded in the Optional 2000-sheet Input Tray (Tray 4) or Tray 4 of the Optional 2 x 500-sheet Input Tray (Trays 4 and 5). 60 Chapter 3 Operating Overview EN