HP 8000dn Service Manual - Page 400
Registration Assembly on, Fuser output, paper stopped
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 400 highlights
Table 7-6. Numerical Printer Messages (continued) Message Event Description Log Category/ Message Recommended Action Error alternates with A page is jammed in an external Check the specified tray. paper handling device. is the device number is the tray number alternates with 13.3 XX Paper delay jam. Paper did not reach PS1 at the registration area. 1. Remove the toner cartridge, lift the green handle, and verify the sensor flag operation. 2. Make sure that the sensor is not broken. 3. Replace the registration assembly if necessary. See "Registration Assembly" on page 207 for instructions. 13.5 XX Fuser output, paper late jam. Remove the toner cartridge, Paper never reached PS1403 at and check the path between the fusing assembly. the registration and fusing assemblies. PS1403 on the sensor PCA may be faulty. 13.6 XX Fuser output, paper stopped jam. Paper never exited the fusing assembly. 1. Check the fuser flag at the sensor board area. 2. Check the fuser access door. 3. Make sure that the flag is not broken. PS1403 on the sensor PCA may be faulty. 13.9 XX Standard output bin paper late jam. Paper did not arrive at PS1402 when expected. Inspect the path between the fuser and delivery assemblies. Check the diverter assembly. 376 Chapter 7 Troubleshooting EN