HP 8000dn Service Manual - Page 221
PCA, DC Controller
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
PCA, DC Controller Figure 6-33 DC Controller PCA 1 Remove the Formatter Assembly (see figure 6-25 on page 186). 2 Remove the back cover (see figure 6-5 on page 162). 3 Remove the High Voltage Power Supply (see figure 6-41 on page 205). 4 Unplug 18 connectors from the PCA (figure 6-33, callout 1). 5 Remove 2 screws (figure 6-33, callout 2) from the left side of the PCA and 2 self-tapping screws (figure 6-33, callout 3) from the right side of the PCA. 6 Release two retaining clips (figure 6-33, callout 4) and carefully tip the left side of the PCA outward to clear the Formatter PCA connector from the card cage. To Reinstall: Make sure the retaining clip posts (figure 6-33, callout 4) and the two locator pins (figure 6-33, callout 5) are properly aligned. EN PCA, DC Controller 197