HP 8000dn Service Manual - Page 177
Multibin Mailbox/5-bin, Mailbox with Stapler, Carefully slide the Multibin Mailbox
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Multibin Mailbox/5-bin Mailbox with Stapler 1 With the printer turned off and unplugged, disconnect the power and interface cables from the Multibin Mailbox/Mailbox with Stapler controller PCA. 2 Carefully slide the Multibin Mailbox/ Mailbox with Stapler away from the printer until the locator tabs and the lower guide rail are clear. To Reinstall: 1 Make sure the lower guide rail and the locator tabs are aligned and the dot pattern on the PCA connector and cable connector match. 2 Make sure that the Interlock Switch is fully depressed. 3 To connect the power cables for the 5-bin Mailbox with Stapler only: Attach and secure the interface cable to the lower connector on the input tray. Route the mailbox's power cord beneath the printer to the transferdoor side of the printer and connect it to the bottom of the powerbox. EN User Installable Accessories 153