HP 8000dn Service Manual - Page 97
CFG TCP/IP=NO, BOOTP=YES, BOOTP=NO, CFG ETALK=NO, ETALK PHASE=1 or 2, Table 3-10. EIO Menu continued
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Table 3-10. EIO Menu (continued) Item Values Explanation : The TCP/IP Menu is not accessible. : The TCP/IP Menu appears. In the TCP/IP Menu, you can specify for TCP/IP parameters to be automatically loaded from a bootp or DHCP server when the printer is turned on. If you specify , you can manually set selected TCP/IP parameters from the control panel. You can manually set each byte of the IP address (IP), Subnet Mask (SM), Syslog Server (LG), and Default Gateway (GW). Also, you can manually set the Timeout time period. : The EtherTalk Menu is not accessible. : The EtherTalk Menu appears. In the EtherTalk Menu you can set the AppleTalk phase parameter ( ) for your network. EN Control Panel Menus 73
EN
Control Panel Menus
73
CFG TCP/IP=NO
NO
YES
NO
: The TCP/IP Menu is not accessible.
YES
: The TCP/IP Menu appears. In the TCP/IP Menu,
you can specify
BOOTP=YES
for TCP/IP parameters to
be automatically loaded from a bootp or DHCP server
when the printer is turned on. If you specify
BOOTP=NO
,
you can manually set selected TCP/IP parameters from
the control panel. You can manually set each byte of the
IP address (IP), Subnet Mask (SM), Syslog Server
(LG), and Default Gateway (GW). Also, you can
manually set the Timeout time period.
CFG ETALK=NO
NO
YES
NO
: The EtherTalk Menu is not accessible.
YES
: The EtherTalk Menu appears. In the EtherTalk
Menu you can set the AppleTalk phase parameter
(
ETALK PHASE=1 or 2
) for your network.
Table 3-10. EIO Menu (continued)
Item
Values
Explanation