HP 8000dn Service Manual - Page 273
Stapler Assembly, Remove the Left Output Bin.
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
Stapler Assembly Figure 6-80 Mailbox with Stapler, Stapler Removal The Stapler Assembly is mounted in the 5-bin Mailbox with Stapler, replacing the three standard output bins. 1 Turn off the printer. 2 Make sure the Delivery Head Assembly is not in the stapler area. It should be in the bottom portion of the mailbox. You can move the Delivery Head Assembly downward gently with your hand. 3 Disconnect the cable going from the stapler to the mailbox. 4 Remove the Left Output Bin. 5 Lift up on the outer edge of the stapler to clear the retaining notches, and pull the stapler forward out of the frame (figure 6-80). To Reinstall: Slide the stapler into its designated slot, and lower it into its retaining notches. Replace the Left Output Bin. Connect the cable from the stapler to the mailbox. Turn the printer on. EN Stapler Assembly 249