HP 8000dn Service Manual - Page 409

Table 7-6. Numerical Printer Messages (continued) Message Event Description Log Category/ Message Recommended Action 13.33 0A A staple is jammed in the stapler. Clear the jammed staple. 13.33 0B 13.33 0C 13.33 0D A rack jam, slider jam, or retainer jam occurred in the stapler. 1. Remove the media, and perform a device reset cycle. 2. If the problem persists, replace the Stapler Controller PCA. See "Stapler Controller PCA" on page 252 for instructions. Replace the Stapler. See "Stapler Assembly" on page 249 for instructions. Error alternates with The printer received more data 1. Press GO to print the than can fit in its available transferred data (some data memory. You might have tried to might be lost). transfer too many macros, soft 2. Simplify the print job, or fonts, or complex graphics. install additional memory. See "Memory and Personality Upgrade" on page 147 for instructions. Error alternates with The data (dense text, rules, 1. Press GO to print the raster or vector graphics) sent to transferred data. (Some the printer was too complex. data might be lost.) 2. To print the job without losing data, from the Configuration Menu in the printer control panel, set , print the job, and then return to . Do not leave ; it might degrade performance. If this message appears often, simplify the print job. EN Printer Messages 385