HP 8000dn Service Manual - Page 238
Sensor, Paper Input Unit (PS2)
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
Sensor, Paper Input Unit (PS2) Note 1 Remove the following components in the order listed: • Toner Cartridge • Trays 2 and 3 • Transfer Roller (see figure 6-52 on page 219) • Registration Assembly (see figure 6-44 on page 208) • Front Cover (see figure 6-6 on page 163) • Tray 1 Assembly (see figure 6-53 on page 221) • Right Lower Door Assembly (see figure 6-15 on page 174) The sensor retaining tabs are released from above, and the sensor is removed and replaced from below. Figure 6-49 Paper Input Unit Sensor (PS2) 2 Release the retaining tabs (figure 6-49, callout 1) on the right end of the sensor, and rotate the sensor down to free the tabs on the left end. 3 Unplug the connector from the sensor. 214 Chapter 6 Removal and Replacement EN
214
Chapter 6 Removal and Replacement
EN
Sensor, Paper Input Unit (PS2)
1
Remove the following components in the order listed:
•
Toner Cartridge
•
Trays 2 and 3
•
Transfer Roller (see figure 6-52 on page 219)
•
Registration Assembly (see figure 6-44 on page 208)
•
Front Cover (see figure 6-6 on page 163)
•
Tray 1 Assembly (see figure 6-53 on page 221)
•
Right Lower Door Assembly (see figure 6-15 on page 174)
Note
The sensor retaining tabs are released from above, and the sensor is
removed and replaced from below.
Figure 6-49
Paper Input Unit Sensor (PS2)
2
Release the retaining tabs (figure 6-49, callout 1) on the right end
of the sensor, and rotate the sensor down to free the tabs on the
left end.
3
Unplug the connector from the sensor.