HP 8000dn Service Manual - Page 401

Table 7-6. Numerical Printer Messages (continued) Message Event Description Log Category/ Message Recommended Action 13.A XX Paper stopped at the standard output bin. Check the paper path. This jam is sensed by PS2401 on the sensor PCA. 13.10 15 A page did not arrive at the Duplexer's first sensor. 1. Open the top cover, and remove any paper. 2. Open the left door, and remove any paper. 3. Remove the paper from the Duplexer. 4. Make sure that paper is being delivered to the Duplexer. 5. Replace the Duplexer if necessary. See "Duplexer" on page 149 for instructions 13.10 XX Duplex turnaround, paper late 1. Check the duplexer and jam. The paper did not reach the the left door area for duplex turnaround when it obstructions. should have. 2. Reseat the duplexer. 3. Replace the duplexer if necessary. See "Duplexer" on page 149 for instructions. 13.11 04 A page stayed too long at the Duplexer's first sensor. 1. Open the left door, and remove any paper. 2. Remove the paper from the Duplexer. 3. Make sure that paper is being delivered to the Duplexer. 4. Replace the Duplexer if necessary. See "Duplexer" on page 149 for instructions. EN Printer Messages 377