HP 8000dn Service Manual - Page 385

Table 7-5. Alphabetical Printer Messages (continued) Message Event Description Log Category/ Message Recommended Action Status Displays when you press the CANCEL JOB key and there is no active job or buffered data to cancel. This displays for approximately 2.5 seconds before the printer returns to the online state. No action required. Status Displays when the printer is offline and there are no error messages pending at the display. Press GO to place the printer online. Error alternates with The output bin is full and needs to be emptied. 1. Remove the media from the standard output bin. 2. Check PS1401 on the sensor PCA. 3. Make sure that the sensor flag moves freely. 65.22.01 The left output bin is too full. 1. Empty the left output bin. 2. Make sure that the sensor flag moves freely. 3. If the problem persists, check for proper cable connection in the flipper area. 4. If the problem persists, replace the Flipper Assembly. See "Flipper Assembly" on page 227 for instructions. 5. Replace the Mailbox Controller PCA. See the HP LaserJet 8000, 8000 N, 8000 DN, and HP Mopier 240 Printers Service Manual Supplement for Paper-handling Accessories for instructions. EN Printer Messages 361