HP 8000dn Service Manual - Page 250
Mailbox with Stapler, Delivery Head Pulley Detail
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Figure 6-57 Mailbox with Stapler, Delivery Head Pulley Detail 8 Release the Anti-Curl Strings from the pulleys on the back of the assembly (figure 6-57, callout 4) by removing the mounting pin from the center. To Reinstall: 1 Replace the Anti-Curl Strings into the pulleys on the back of the assembly. (You may need to release the Anti-Curl String Springs at the bottom of the frame to have enough slack.) 2 Carefully replace the ribbon cable into its connector. 3 Insert the left end of the assembly through its access opening and position the assembly onto its elevator mounts. Make sure that the locating pins are in place. 4 Replace the 2 screws. 5 Reattach the Anti-Curl String Springs at the bottom of the frame. 226 Chapter 6 Removal and Replacement EN