HP 8000dn Service Manual - Page 209
Formatter Assembly, Service Menu.
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Formatter Assembly Note Setting Page Count, Maintenance Count, and Serial Number The page count, maintenance count, and printer serial numbers are stored in Non-Volatile Memory. is the total number of images printed by the printer, is the page count when the next preventive maintenance should be performed (every 350,000 images), and is the printer serial number (also located on the printer back cover). If it is necessary to replace the Formatter PCA, these numbers should be set to the current values to accurately reflect the age of the print engine. The procedures for setting these values are listed in table 3-12 on page 76. Before removing the old Formatter PCA, print a Configuration Page to verify the current values, if possible. If it is not possible to print a Configuration Page, try to verify the values before replacing the Formatter PCA by following steps 1 through 3, below. After verifying the page count, maintenance count, and printer serial number from the old Formatter PCA, replace it with the new PCA. 1 Enter Service Mode as described in "Service Mode" on page 75. 2 When Service Menu. is displayed, press MENU to access the 3 Press ITEMS to display , , and . 4 Enter the appropriate values for each item. 5 Press GO to exit Service Mode. EN Formatter Assembly 185